Rebar Tying Machine Steel Bar Tying Machine Building Construction Equipment

chinacoal09
https://www.chinacoalintl.com
https://m.chinacoalintl.com
we provide service of enterprise's customs declaration, inspection.

Features:

1.About 5 times faster than manual tying. Make ties in approx one second per tie with consistent tie strength. High speed tying saves you time and money. 

2.Simple operation reduces potential wrist damage such as carpal tunnel injuries

3.The brushless electric motor offers higher efficiency and longer lifetime. It increases ties per charge by 30% and does not require service caused by brush erosion or dirt on commutator. 

4.The combination of 16 gauge tie wire and a powerful twisting motor insure a perfect tie every time. Wire usage is regulated automatically.

Main technical parameters for rebar tying machine

Model	WL-210	WL-400
Max Tying Diameter	21mm	40mm
Time of Making a Knot	0.8 seconds	0.8 seconds
Battery Type	9.6V  Ni-MH   3000mAh	9.6V  Ni-MH   3000mAh
Charge time	1 hour quick charger	1 hour quick charger
GW of Machine	2.1kgs	2.1kgs
Max. Number of Tying Knots	1200ties (one Ni-MH battery)	1200ties (one Ni-MH battery)
Wire Type	galvanized steel wire,Annealed steel wire	galvanized steel wire,Annealed steel wire
Wire Size	0.8mm diameter	0.8mm diameter

New Type Steel Rebar Tying Machine Building Construction Equipment

chinacoal09manual rebar tying tool,a hand held electrical tool,can tie rebar quickly and automaticaly.Powered by rechargeable battery it can be used alternatively and continuously.Tying can be completed by putting the jaw on the crossed rebars and pulling the trigger only.It saves labor and highly imporves working efficiency.it is easy and simple to operate,convenient and light to carry.it is widely used in European countries and the United States and welcomed by the construction.

Advantages:

1,Perfect tying:With appropriate using of the machine, tying knot is perfect,and all the ties are firm

2,Adaptability:the same machine used to work with different diameters of bars,stirrups,hangers,etc.

3,Easy of use:In just a few days the less experienced learner becomes an accomplished  

   professionals of your work.

4,Effortless:The operator is able to work all day without fatigue

5,No risk:Low voltage of battery without risk of electricity

Features:

1.Max. Tying Knots: more than 3000 knots on a single charge
2.Typing time: 0.8second/knot
3.The number of the knot can be select to be 2 turns or 3 turns
4.Packing precast concrete products
5.Precast steel or mental tubing packing in architecture engineering scen
6.Rebar tying machine Widely used in construction industry
7.Rebar tying machine (WL-210&WL-400 ) conforms to 89/336/EEC Electromagnetism Compatible,    73/23/EEC Low Voltage and 98/37/EC Machinery Requirement of ECC Instruction.
8.Rebar tying machine (WL-210/WL-400) is hand-held machine used to pack rebars quickly.
9.Automatic rebar tying machine by iwiss made is a miniature motor tool possesses the trait of safety    and credibility

Battery Type:

9.6V  Ni-MH   3000mAh

Charge time : 1 hour

Charger: 110-240V   50/60Hz

Max. Rebar Diameter: 40mm

Max. Number of Tying Knots:

 (the battery of full charge)

1200ties (one Ni-MH battery)

Tying Speed: 0.8second/knot

Wire Type: galvanized steel wire

           Annealed steel wire

Wire Size:

GW of Machine: 2.1kg

Contents:

. 1Pc of Rebar Tying Machine

. 2Pcs of Battery

. 1Pc of Charger

. 4Pcs of Steel Wire Spool

. 1pc of Inner Hexagon Spanner

. 1pc of Sharp Nose Pliers

Packing Size: 408×162×418mm

GW of one set: 7.5kg

https://www.chinacoalintl.com
https://m.chinacoalintl.com
we provide service of enterprise's customs declaration, inspection.

Auto Steel Tying Machine / Rebar Tying Gun Building Construction Equipment

chinacoal09
https://www.chinacoalintl.com
https://m.chinacoalintl.com
we provide service of enterprise's customs declaration, inspection.

Product Introduction

Features:

1.About 5 times faster than manual tying. Make ties in approx one second per tie with consistent tie strength. High speed tying saves you time and money. 

2.Simple operation reduces potential wrist damage such as carpal tunnel injuries

3.The brushless electric motor offers higher efficiency and longer lifetime. It increases ties per charge by 30% and does not require service caused by brush erosion or dirt on commutator. 

4.The combination of 16 gauge tie wire and a powerful twisting motor insure a perfect tie every time. Wire usage is regulated automatically.

Main Parameter

Model	WL-210	WL-400
Max Tying Diameter	21mm	40mm
Time of Making a Knot	0.8 seconds	0.8 seconds
Battery Type	9.6V Ni-MH   3000mAh	9.6V Ni-MH   3000mAh
Charge time	1 hour quick charger	1 hour quick charger
GW of Machine	2.1kgs	2.1kgs
Max. Number of Tying Knots	1200ties (one Ni-MH battery)	1200ties (one Ni-MH battery)
Wire Type	galvanized steel wire,Annealed steel wire	galvanized steel wire,Annealed steel wire
Wire Size	0.8mm diameter	0.8mm diameter

  Contents:
. 1Pc of Rebar Tying Machine
. 2Pcs of Battery 
. 1Pc of Charger
. 4Pcs of Steel Wire Spool 
. 1pc of Inner Hexagon Spanner
. 1pc of Sharp Nose Pliers
Packing Size: 408×162×418mm
GW of one set: 7.5kg
Certificate: CE

Rebar Tying Machine / Rebar Tier Building Construction Equipment

chinacoal09
https://www.chinacoalintl.com
https://m.chinacoalintl.com
we provide service of enterprise's customs declaration, inspection.

Product Introduction

WL electric reinforcing automatic steel rebar tying machine / rebar tier :  is hand-held intellective battery dynamoelectric device,it possesses the trait of secure and 

credible, reasonable ,advance d cratt,easily manipulate,high work efficiency.It can use

 in the architecture engineering to pack precast Rebars.It can highly raise the speed of 

engineer .

Main Parameter

Model	WL-210	WL-400	WL-500
Max Tying Diameter	21mm	40mm	50mm
Time of Making a Knot	0.8 s	0.8 s	0.8s
Battery Type	9.6V Ni-MH   3000mAh	9.6V Ni-MH   3000mAh	9.6V Ni-MH   3000mAh
Charge time	1 hour quick charger	1 hour quick charger	1 hour quick charger
GW of Machine	2.15kgs	2.2kgs	2.25kgs
Max. Number of Tying Knots	1200ties (one Ni-MH battery)	1200ties (one Ni-MH battery)	1200ties (one Ni-MH battery)
Wire Type	galvanized steel wire, Annealed steel wire	galvanized steel wire, Annealed steel wire	galvanized steel wire, Annealed steel wire
Wire	0.8mm	0.8mm	0.8mm
Turns per Tie	2 turns/3turns	2 turns/3turns	3turns/4turns
Ties per Coil	Approx. 260ties(2turns)	Approx.160ties(2turns)	Approx. 100 ties(3 turns)
Ties per Charge	4-5 Coils	6-7 Coils	7-8 Coils